Ship Series Request, Systems Alliance Mass Effect

[RenegadeKraken]

Hello, this request is for a series on the human ships in Mass Effect

The list is

1. Alamo Class Frigate as a starter

http://img13.deviantart.net/5ca2/i/2015/340/c/d/system_alliance_alamo_class_frigate_overview_by_euderion-d9j8b57.jpg

 

2. Actium class heavy frigate as an upgrade

http://img11.deviantart.net/deb8/i/2016/135/3/c/alliance_frigate_actium_class___refit_1_by_nach77-d957zbz.jpg

 

3. The rest of the ships are in this tree, best I could find

http://pre15.deviantart.net/a800/th/pre/f/2016/056/e/0/systems_alliance_starship_size_comparison_by_euderion-d9t2h2i.jpg

 

To those unaware the ships are supposed to be built around a spinal mounted, rapid fire, magnetic accelerator cannon.

 

I am terrible, absolutely terrible at making or designing ships so if someone is looking for a challenge then I present you with one without a doubt. If work does start on these ships I don't know how to repay you but if you have a patreon I would gladly subscribe to assist in your efforts.

 

Edit: Am willing to pay 15 USD/Ship

Will pay 5 USD to start and when the ship is finished I will pay the last 10 USD

[Lannik]

The smaller ships such as the Normandy would have to be scaled up greatly. The flat diagonals are always tricky to get right and look good. The Everest class and up though shouldn't pose too much a problem. I currently have a few Ideas on other ships lined up but I may take one of these on eventually.

[Tsunamik]

I might eventually go for envoy class, its gonna need quite a lot of work, but should be atleast doable.. and looks really great tho :)

[RenegadeKraken]

Well ideally the middle class of ship to use would be the York class as it is your regular Cruiser and the most common ship in the Alliance fleet to fight in the line of battle.

 

For the smaller ships, anything less than about 300m is way too small for this game and was only there to show a "tech progression" tree.

[RenegadeKraken]

Bump for the edit

 

If interested please PM me or friend request me on Steam.

 

http://steamcommunity.com/profiles/76561198034166024/

[sudo]

Hello. Forgive me for trying to conduct a conversation in English without knowing it, but I'll still try to answer.

 

I already tried to create a ship of the "Everest" class on this 3D model

 

https://3dwarehouse.sketchup.com/model/u0b816824-a753-4e0b-84bb-c3b3457e33a1/Mass-effect-Alliance-Cruiser-SSV-COPPENHAGEN

But I did not get any of this due to some shortcomings of the original Avorion editor.

 

Here is the link to my unfinished work, in which I had difficulties

https://cloud.mail.ru/public/8D74/ceURKwH3x

 

The problem is that if you try to make the back of the side bevels with the help of corner blocks, then their end will always look down as if you did not smoke them, but if you want to point their end upwards as it should be, they will not match the bevels directed forward.