Whenever I'm building stuff at a small scale like 0.1 or 0.05, I often find that the blocks I'm trying to place stubbornly refuse to line up. That is, they tend to overlap by half a 0.05 block, or 0.025. But there's really not much I can do about this since the Grid Size scale only goes as small as 0.05... :(
This is even more of a problem when I'm trying to copy and past arrays of small (0.1 or 0.5) blocks. Those will overlap by 0.025 almost every time.
Maybe this is a bug? It seems like I'm always having to set my Grid Size to half of my Scale Step. Because, if I don't, then stuff tends to not line up properly. So, if I'm building with the default 0.5 scale, then I have to use a Grid Size of 0.25 to make it line up, and with a Scale Step of 0.4, I find myself using Grid Step 0.2... :(
Suggestion
Thundercraft
Whenever I'm building stuff at a small scale like 0.1 or 0.05, I often find that the blocks I'm trying to place stubbornly refuse to line up. That is, they tend to overlap by half a 0.05 block, or 0.025. But there's really not much I can do about this since the Grid Size scale only goes as small as 0.05... :(
This is even more of a problem when I'm trying to copy and past arrays of small (0.1 or 0.5) blocks. Those will overlap by 0.025 almost every time.
Maybe this is a bug? It seems like I'm always having to set my Grid Size to half of my Scale Step. Because, if I don't, then stuff tends to not line up properly. So, if I'm building with the default 0.5 scale, then I have to use a Grid Size of 0.25 to make it line up, and with a Scale Step of 0.4, I find myself using Grid Step 0.2... :(
Am I the only one experiencing this?
Link to comment
Share on other sites
7 answers to this suggestion
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now